2. Install the interface board [A] into the slot (Knob-screw x 2 [B]).
3. Make sure that the machine can recognize the option (see "Check All Connections" at the end of
this section).
IEEE 802.11a/g, g Interface Unit Type J/K
Installation Procedure
• Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces at one time: (IEEE 802.11a/g, g (Wireless
LAN), IEEE1284, Bluetooth, File format converter).
Controller Options
135
To Next Page
Loading...
