068
CERT: Error
Displays a number code that describes the reason for the request for update of the
certification.
0 Normal. There is no request for certification update in progress.
1 Request for certification update in progress. The current certification has expired.
2
An SSL error notification has been issued. Issued after the certification has
expired.
3 Notification of shift from a common authentication to an individual certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
069 CERT:Up ID The ID of the request for certification.
083 Firm Up Status
Displays the status of the firmware update
[0 to5 / - / 1 /step]
085 Firm Up User Check
This SP setting determines if the operator can confirm the
previous version of the firmware before the firmware
update execution. If the option to confirm the previous
version is selected, a notification is sent to the system
manager and the firmware update is done with the
firmware files from the URL.
086 Firmware Size
Allows the service technician to confirm the size of the
firmware data files during the firmware update
execution.
087 CERT:Macro Ver. Displays the macro version of the @Remote certification.
088 CERT:PAC Ver. Displays the PAC version of the @Remote certification.
089 CERT:ID2Code
Displays ID2 for the @Remote certification. Spaces are
displayed as underscores (_). Asteriskes (****)
indicate that no @Remote certification exists.
Main SP Tables-5
299
To Next Page
Loading...
