126
Reso: Fax(Mono)
This is basically adjusted by the remote
system.
[0 to 6 / 3 / 1/step]
Selects the resolution for BW fax mode. This is basically adjusted by the remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
127
Reso: Scanner(Color)
This is basically adjusted by the remote
system.
[0 to 6 / 4 / 1/step]
Selects the resolution for color scanning mode. This is basically adjusted by the remote
system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
128
Reso: Scanner(Mono)
This is basically adjusted by the remote
system.
[0 to 6 / 3 / 1/step]
Selects the resolution for BW scanning mode. This is basically adjusted by the remote
system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
141 All Addr Info Switch [0 or 1 / 1 / 1/step]
142 Stand-by Doc Max Number [10 to 10000 / 2000 / 1/step]
5840 [IEEE 802.11]
006
Channel Max *CTL
[1 to 11 or 13 / 11 or 13 / 1 /step]
Europe/Asia: 1 to 13
NA/ Asia: 1 to 11
Sets the maximum number of channels available for data transmission via the wireless
LAN. The number of channels available varies according to location. The default settings
are set for the maximum end of the range for each area. Adjust the upper 4 bits to set the
maximum number of channels. DFU
• Do not change the setting.
Main SP Tables-5
315
To Next Page
Loading...
