005 Fixed USB Port *CTL
[ 0x00 to 0x02 / 0x00 /1 step]
0x00: Disable
0x01: Enable (Level 1)
Device driver reinstallation is not required in
the same machine.
0x02: Enable (Level 2)
Device driver reinstallation is not required in
any machine.
006 PnP Model Name *CTL -
007 PnP Serial Number *CTL -
008 *CTL [ 0 or 1 / 1 / 1/step]
100 Notify Unsupport *CTL [0x00 or 0x01 / 0x01 / 1/step]
5845
[Delivery Server Setting] *CTL -
Provides items for delivery server settings.
001
FTP Port No. [1 to 65535 / 3670 / 1 /step]
Sets the FTP port number used when image files to the Scan Router Server.
002
IP Address (Primary)
Range:000.000.000.000 to
255.255.255.255
Use this SP to set the Scan Router Server address. The IP address under the transfer tab
can be referenced by the initial system setting.
006
Delivery Error Display Time [0 to 999 / 300 / 1 second /step]
Use this setting to determine the length of time the prompt message is displayed when a
test error occurs during document transfer with the NetFile application and an external
device.
008
IP Address (Secondary)
Range:000.000.000.000 to
255.255.255.255
Specifies the IP address assigned to the computer designated to function as the
secondary delivery server of Scan Router. This SP allows only the setting of the IP
address without reference to the DNS setting.
Main SP Tables-5
319
To Next Page
Loading...
