002 UndoExec *CTL
This SP copies back the application programs
from an SD card in SD Card Slot 2 to the
original SD card in SD card slot 1. Use this
menu
when you have mistakenly copied some
programs by using "Move
Exec" (SP5873-1).
5875 [SC Auto Reboot]
001 Reboot Setting *CTL
Enables or disables the automatic reboot
function when an SC error occurs.
[0 or 1/ 0 / – ]
0: The machine reboots automatically when
the machine issues an SC error and logs the
SC error code. If the same SC occurs again,
the machine does not reboot.
1: The machine does not reboot when an SC
error occurs.
The reboot is not executed for Type A or C
SC codes.
002 Reboot Type *CTL
Selects the reboot method for SC.
[0 or 1 / 0 / -]
0: Manual reboot, 1: Automatic reboot
5876 [Security Clear]
001 All Clear *CTL [- / - / -](Execute)
011 Clear NCS Security Setting *CTL [- / - / -](Execute)
015 Clear UCS Security Setting *CTL [- / - / -](Execute)
5878 [Option Setup]
001 Data Overwrite Security *CTL
Enables the Data Overwrite Security unit.
Press "EXECUTE" on the operation panel.
Then turn the machine off and on.
002 HDD Encryption *CTL Installs the HDD Encryption unit.
3. SP Mode Tables
332
To Next Page
Loading...
Need help?
General
