Paper Size (W x L)
Main Tray PFU By-pass Tray
Duplex
NA E/A NA E/A NA E/A
Custom
(Length)
mm 210 to 297 210 to 356.6 139 to 600 -
inch
8.27” to
11.69”
8.27" to 14.03" 5.48" to 23.62" -
Com10 Env. 4.13" x 9.5" N N N N Y Y N
Monarch Env. 3.88" x 7.5" N N N N Y Y N
C6 Env. 114 x 162 mm N N N N Y Y N
C5 Env. 162 x 229 mm N N N N Y Y N
DL Env. 110 x 220 mm N N N N Y Y N
Y: Supported: the sensor detects the paper size.
Y#: Supported: the user specifies the paper size.
N: Not supported
Y*: A paper tray unit is required. (Not available for Main Tray)
• The paper sizes can be set with the operation panel in 1 mm steps.
• The usable range of paper sizes is as follows:
•
Width: 76.2 to 216 mm (3” to 8.5”)
• Length: 139 to 600 mm (5.48” to 23.62”)
• Auto Duplex mode is not available for By-pass tray.
1. Appendices
10
To Next Page
Loading...
