2497
[Thick1:TrailEdgeCorrection]
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode.
003 Paper Transfer:1side *ENG
[0 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2498
[Thick1:SwitchTimingTrailEdge]
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode.
003 Paper Transfer:1side *ENG
[0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2499 [Thick1:EnvCorrectionTable]
015 Separation DC:1side *ENG
[1 to 100 / 30 / 1/step]
016 Separation DC:2side *ENG
2499 [Thick1:EdgeEnvCorrection]
019 Separation DC:1side *ENG
[1 to 100 / 30 / 1/step]
020 Separation DC:2side *ENG
2501
[Thick2:Bias]
Adjusts the DC voltage of the discharge plate for thick 2 paper.
003 Separation DC:1side *ENG
[0 to 4000 / 0 / 10-V/step]
004 Separation DC:2side *ENG
3. SP Mode Tables
132
To Next Page
Loading...
