2595
[Special2:LeadingEdgeCorrection]
Adjusts the correction to the paper transfer roller current at the paper leading edge in
each mode.
001 PaperTransfer:standard:1Side *ENG
[0 to 995 / 100 / 5%/step]
002 PaperTransfer:standard:2Side *ENG
003 Paper Transfer:Low:1side *ENG
004 Paper Transfer:Low:2side *ENG
005 Separation DC:standard:1side *ENG
006 Separation DC:standard:2side *ENG
007 Separation DC:Low:1side *ENG
008 Separation DC:Low:2side *ENG
2596
[Special2:SwitchTimingLeadEdge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 PaperTransfer:standard:1side *ENG
[0 to 50 / 0 / 2mm/step]
002 PaperTransfer:standard:2side *ENG
003 Paper Transfer:Low:1side *ENG
004 Paper Transfer:Low:2side *ENG
005 Separation DC:standard:1side *ENG
006 Separation DC:standard:2side *ENG
007 Separation DC:Low:1side *ENG
008 Separation DC:Low:2side *ENG
2597
[Special2:TrailEdgeCorrection]
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode.
Main SP Tables-2
153
To Next Page
Loading...
