2676
[Thick2:SwitchTimingLeadEdge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
003 Paper Transfer:1side *ENG
[0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2677
[Thick2:TrailEdgeCorrection]
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode.
003 Paper Transfer:1side *ENG
[0 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2678
[Thick2:SwitchTimingTrailEdge]
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode.
003 Paper Transfer:1side *ENG
[0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2679 [Thick2:EnvCorrectionTable]
015 Separation DC:1side *ENG
[1 to 100 / 30 / 1/step]
016 Separation DC:2side *ENG
2679 [Thick2:EdgeEnvCorrection]
Main SP Tables-2
171
To Next Page
Loading...
Need help?
General
