3073 [TD.Sens Chk :Disp]
001 Vt:K *ENG
[0.00 to 5.50 / - / 0.01V/step]
002 Vt:C *ENG
003 Vt:M *ENG
004 Vt:Y *ENG
3074 [ID.Sens Check :Exe]
001 All Sensors ENG
[- / - / -]
[Execute]
3075 [ID.Sens Chk :Disp]
001 Vsg reg(front) *ENG
[0.00 to 5.50 / - / 0.01V/step]
002 Vsg reg(center) *ENG
003 Vsg reg(rear) *ENG
011 Voffset(front) *ENG
012 Voffset(center) *ENG
013 Voffset(rear) *ENG
3100 [Tonner End Detection: Set]
001 ON/OFF *ENG
Sets if NE/TE is detected or not.
[0 or 1 / 0 / 1/step]
0:Detect, 1:NotDetect
002 NE Detection *ENG
Sets NE/TE detection mode.
[0 or 1 / 0 / 1/step]
0:ALL, 1:TESensor
3101 [Toner Status: Display]
3. SP Mode Tables
180
To Next Page
Loading...
Need help?
General
