113 SMITH:LowSpd *ENG
Sets the liner speed correction to the gain for
the Smith model.
[0.00 to 1.00 / 1.00 / 0.01/step]
3462 [TonerSupply :DANC]
001 ANC:Power *ENG
Sets the request value of ANC to change the all
ANC filters at one time.
[0 to 200 / 100 / 1%/step]
100: normal control, 0: without ANC
101 ANC:Gain *ENG
Sets the of all ANC filters.
[0.00 to 2.00 / 1.00 / 0.01/step]
103 ANC:Rate:LowSpd *ENG
Sets the liner speed correction to the gain of all
ANC filters (Low speed).
[0.00 to 1.00 / 1.00 / 0.01/step]
3463 [TonerSupply :DANC]
101 Int:I:K *ENG
Sets the value for I storage corresponding to
the power off/on.
[-1000.0000 to 1000.0000 / 0.0000 /
0.0001/step]
102 Int:I:C *ENG
103 Int:I:M *ENG
104 Int:I:Y *ENG
111 ANC:ref Sum:K *ENG
Sets the value for ANC storage corresponding
to the power off/on.
[-1000.0000 to 1000.0000 / 0.0000 /
0.0001/step]
112 ANC:ref Sum:C *ENG
113 ANC:ref Sum:M *ENG
114 ANC:ref Sum:Y *ENG
201 ImgArea:K *ENG
Displays the image area of the latest page.
[0.00 to 999.00 / - / 0.01cm2/step]
202 ImgArea:C *ENG
203 ImgArea:M *ENG
204 ImgArea:Y *ENG
Main SP Tables-3
203
To Next Page
Loading...
