091 TC Corr ThreshHold:K *ENG
Sets the toner density threshold to correct with
toner correction of developer gamma (target
value).
[7.0 to 12.0 / 9.0 / 0.1wt%/step]
092 TC Corr ThreshHold:C *ENG
093 TC Corr ThreshHold:M *ENG
094 TC Corr ThreshHold:Y *ENG
101 UpperLimit *ENG
Sets the developer gamma initial value.
[1.00 to 5.00 / 5.00 / 0.01mg/cm^2/-kV/
step]
102 LowerLimit *ENG
[0.10 to 1.00 / 0.15 / 0.01mg/cm^2/-kV/
step]
3631 [Vk :Disp]
001 K *ENG
Displays the latest developer starting voltage.
[-300 to 300 / - / 1-V/-kV/step]
002 C *ENG
003 M *ENG
004 Y *ENG
3700 [New Unit Detection]
001 ON/OFF Setting *ENG
Sets if new unit is detected or not.
[0 or 1 / 1 / 1/step]
3701 [Manual New Unit Set]
001 Development Unit: K *ENG
Sets the flag for new development unit manual
settings.
[0 or 1 / 0 / 1/step]
002 Development Unit: C *ENG
003 Development Unit: M *ENG
004 Development Unit: Y *ENG
3. SP Mode Tables
226
To Next Page
Loading...
