021 Fusing Pad *ENG
Sets the flag for new fusing pad manual
settings.
[0 or 1 / 0 / 1/step]
022 ZnSt: PCU:K *ENG
Sets the flag for new lubricant for PCU manual
settings.
[0 or 1 / 0 / 1/step]
023 ZnSt: PCU:C *ENG
024 ZnSt: PCU:M *ENG
025 ZnSt:PCU:Y *ENG
026 ZnSt:Image Transfer Unit *ENG
Sets the flag for new lubricant for image
transfer unit manual settings.
[0 or 1 / 0 / 1/step]
027 Toner Sub Hopper: K *ENG
Sets the flag for new toner sub hopper manual
settings.
[0 or 1 / 0 / 1/step]
028 Toner Sub Hopper: C *ENG
029 Toner Sub Hopper: M *ENG
030 Toner Sub Hopper: Y *ENG
3710 [HST Concentration Control: Set]
001 Control Method: Selection *ENG
Sets the select mode if control is done or not
with HST memory.
[0 or 1 / 1 / 1/step]
0:NotUse, 1:Use
3711 [HST Concentration Control: K]
001 Vcnt *ENG Displays release check value stored in HST
memory.
[0.0 to 5.0 / - / 0.1V/step]
002 Vt *ENG
003 Sensitivity: HL *ENG
Displays release check value stored in HST
memory.
[1.22 to 3.77 / - / 0.01V/step]
3. SP Mode Tables
228
To Next Page
Loading...
