4902
[Disp ACC Data]
This SP outputs the final data read at the end of ACC execution.
A zero is returned if there was an error reading the data.
001 R_DATA1 *ENG
Photo C Patch Level 1 (8-bit)
[0 to 255 / - / 1 /step]
002 G_DATA1 *ENG
Photo M Patch Level 1 (8-bit)
[0 to 255 / - / 1 /step]
003 B_DATA1 *ENG
Photo Y Patch Level 1 (8-bit)
[0 to 255 / - / 1 /step]
004 R_DATA2 *ENG
Photo C Patch Level 17 (8-bit)
[0 to 255 / - / 1 /step]
005 G_DATA2 *ENG
Photo M Patch Level 17(8-bit)
[0 to 255 / - / 1 /step]
006 B_DATA2 *ENG
Photo Y Patch Level 17 (8-bit)
[0 to 255 / - / 1 /step]
4905
[Select Gradation Level]
Selects the gradation level.
001 Select Gradation Level *ENG [0 to 255 / 0 / 1/step]
4918
[Man Gamma Adj]
Adjusts the manual gamma for Copy/Photo or Copy/Text with the soft keys on the
operation panel.
009 Man Gamma Adj ENG
[- / - / -]
[Change]
4930
[Coverage Ctrl: Text]
Sets the total regulation value.
001 Copy: Full Color 1 *ENG [0 to 400 / 200 / 1/step]
3. SP Mode Tables
266
To Next Page
Loading...
Need help?
General
