068
CERT: Error *CTL [0 to 255 / 0 / 1/step]
Displays a number code that describes the reason for the request for update of the
certification.
0 Normal. There is no request for certification update in progress.
1 Request for certification update in progress. The current certification has expired.
2
An SSL error notification has been issued. Issued after the certification has
expired.
3 Notification of shift from a common authentication to an individual certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
069
CERT:Up ID *CTL [- / - / -]
The ID of the request for certification.
083
Firm Up Status *CTL
[0 to 5 / 0 / 1/step]
0: waiting for receiving firmware update.
1: waiting for scheduling firmware update
start.
2: waiting for user confirmation
3: preparing for device firmware update.
4: processing device firmware update.
5: termination processing
Displays the status of the firmware update
085
Firm Up User Check *CTL [- / - / -]
This SP setting determines if the operator can confirm the previous version of the firmware
before the firmware update execution. If the option to confirm the previous version is
selected, a notification is sent to the system manager and the firmware update is done
with the firmware files from the URL.
086
Firmware Size *CTL [- / - / -]
Allows the service technician to confirm the size of the firmware data files during the
firmware update execution.
3. SP Mode Tables
318
To Next Page
Loading...
