Ricoh AFICIO MP C305SP - Page 335

023 By-pass: Special 1: 1200 *ENG [-9.0 to 9.0 / 1.1 / 0.1mm/step]
024 Duplex: Special 1: 1200 *ENG [-9.0 to 9.0 / 1.1 / 0.1mm/step]
1002
[Side-to-Side Registration] Side-to-Side Registration Adjustment
Adjusts the side-to-side registration by changing the laser main scan start position for
each mode and tray.
001 By-pass Table *ENG [-4.0 to 4.0 / 0.0 / 0.1mm/step]
002 Paper Tray 1 *ENG [-4.0 to 4.0 / 0.0 / 0.1mm/step]
003 Paper Tray 2 *ENG [-4.0 to 4.0 / 0.0 / 0.1mm/step]
004 Paper Tray 3 *ENG [-4.0 to 4.0 / 0.0 / 0.1mm/step]
005 Duplex *ENG [-4.0 to 4.0 / 0.0 / 0.1mm/step]
1003
[Paper Buckle] Paper Buckle Adjustment
(Tray Location, Paper Type), Paper Type: N: Normal, TH: Thick
Adjusts the amount of paper buckle at the registration roller by changing the paper feed
timing.
001 Paper Tray1: Plain *ENG [-5 to 5 / 0 / 1mm/step]
002 Paper Tray1: Middle Thick *ENG [-5 to 5 / 0 / 1mm/step]
003 Paper Tray1: Thick *ENG [-5 to 5 / 0 / 1mm/step]
004 Paper Tray2/3: Plain *ENG [-5 to 5 / 0 / 1mm/step]
005 Paper Tray2/3: Middle Thick *ENG [-5 to 5 / 0 / 1mm/step]
006 Paper Tray2/3: Thick *ENG [-5 to 5 / 0 / 1mm/step]
007 By-pass: Plain *ENG [-5 to 5 / 0 / 1mm/step]
008 By-pass: Middle Thick *ENG [-5 to 5 / 0 / 1mm/step]
009 By-pass: Thick *ENG [-5 to 5 / 0 / 1mm/step]
010 Duplex: Plain *ENG [-5 to 5 / 0 / 1mm/step]
011 Duplex: Middle Thick *ENG [-5 to 5 / 0 / 1mm/step]
012 Duplex: Thick *ENG [-5 to 5 / 0 / 1mm/step]
Main SP Tables-1
333