001 PaperTransfer:Standard:1Sid:S1 *ENG
[100 to 995 / 100 / 5%/step]
003 PaperTransfer:Low:1Side:S1 *ENG
005 PaperTransfer:Standard:1Sid:S2 *ENG
[100 to 995 / 135 / 5%/step]
007 PaperTransfer:Low:1Side:S2 *ENG
009 PaperTransfer:Standard:1Sid:S3 *ENG
011 PaperTransfer:Low:1Side:S3 *ENG
013 PaperTransfer:Standard:1Sid:S4 *ENG
[100 to 995 / 220 / 5%/step]
015 PaperTransfer:Low:1Side:S4 *ENG
2481
[Thick1:Bias]
Adjusts the DC voltage of the discharge plate for thick 1 paper.
003 Separation DC:1side *ENG
[0 to 4000 / 0 / 10-V/step]
004 Separation DC:2side *ENG
2483
[Thick1:Bias:BW]
Adjusts the current for the paper transfer roller for thick 1 paper in black-and-white mode.
003 PaperTransfer:1side *ENG [0 to 200 / 15 / 1-uA/step]
004 PaperTransfer:2side *ENG [0 to 200 / 18 / 1-uA/step]
2487
[Thick1:Bias:FC]
Adjusts the current for the paper transfer roller for thick 1 paper in full color mode.
Middle: 182 mm/sec, Low: 85 mm/sec
003 PaperTransfer:1side *ENG [0 to 200 / 19 / 1-uA/step]
004 PaperTransfer:2side *ENG [0 to 200 / 25 / 1-uA/step]
2491
[Thick1:SizeCorrection:BW]
Adjusts the size correction coefficient for the paper transfer roller current for each paper
size.
5. System Maintenance
378
To Next Page
Loading...
Need help?
General
