003 Paper Transfer:1side *ENG
[100 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2518
[Thick2:SwitchTimingTrailEdge]
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode.
003 Paper Transfer:1side *ENG
[0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2521
[Thick3:Bias]
Adjusts the DC voltage of the discharge plate for thick 3 paper.
003 Separation DC:1side *ENG
[0 to 4000 / 0 / 10-V/step]
004 Separation DC:2side *ENG
2523
[Thick3:Bias:BW]
Adjusts the current for the paper transfer roller for thick paper 3 in black-and-white mode.
003 PaperTransfer:1side *ENG [0 to 200 / 14 / 1-uA/step]
004 PaperTransfer:2side *ENG [0 to 200 / 15 / 1-uA/step]
2527
[Thick3:Bias:FC]
Adjusts the current for the paper transfer roller for thick paper 3 in full color mode.
003 PaperTransfer:1side *ENG [0 to 200 / 18 / 1-uA/step]
004 PaperTransfer:2side *ENG [0 to 200 / 20 / 1-uA/step]
5. System Maintenance
382
To Next Page
Loading...
Need help?
General
