001 Process Control *ENG Enables or disables each adjustment at toner
near end.
[0 or 1 / 1 / 1/step]
0:Permit (adjustment is done even toner near
end condition)
1:Forbid (adjustment is not done at toner near
end condition)
002 MUSIC *ENG
003 TC Adj. *ENG
3510 [ImgQltyAdj :ExeFlag]
001 Toner Recovery: K *ENG
Sets the execution flag for toner recovery.
[0 or 1 / 0 / 1/step]
002 Toner Recovery: C *ENG
003 Toner Recovery: M *ENG
004 Toner Recovery: Y *ENG
011 Init TD Sensor :K *ENG
Sets the execution flag for TD sensor initial
settings.
[0 or 1 / 0 / 1/step]
012 Init TD Sensor :C *ENG
013 Init TD Sensor :M *ENG
014 Init TD Sensor :Y *ENG
021 Process Control *ENG
Sets the execution flag for process control.
[0 to 2 / 0 / 1/step]
022 Developer Agitating *ENG
Sets the execution flag for developer agitating.
[0 or 1 / 0 / 1/step]
023 Blade Damage Prevention *ENG
Sets the execution flag for blade damage
prevention mode.
[0 or 1 / 0 / 1/step]
024 MUSIC *ENG
Sets the execution flag for MUSIC.
[0 to 2 / 0 / 1/step]
025 Vsg Adj. *ENG
Sets the execution flag for Vsg adjustment.
[0 or 1 / 0 / 1/step]
5. System Maintenance
408
To Next Page
Loading...
