004 Attack Max Num *CTL
Sets a limit on the number of requests received
for certification in order to slow down the
certification speed when an excessive number of
access attempts have been detected.
[50 to 200 / 200 / 1 attempt/step]
5420
[User Authentication]
These settings should be done with the System Administrator.
• These functions are enabled only after the user access feature has been enabled.
001 Copy *CTL
Determines whether certification is required
before a user can use the copy applications.
[0 to 1 / 0 /1]
0: On, 1: Off
002
Color Security Setting *CTL -
Enables or disables the color copy limitation for each copy mode when the user
authentication is "ON".
0: Enable (default), 1: Disable
Bit0: B/W mode
Bit1: Mono color mode
Bit2: Two colors mode
Bit3: Full color mode
Bit4: Automatic color mode
Bit5 to 7: Reserved
011 DocumentServer *CTL
Determines whether certification is required
before a user can use the document server.
[0 or 1/ 0 /1]0: On , 1: Off
021 Fax *CTL
Determines whether certification is required
before a user can use the fax application.
[0 or 1/ 0 /1]0: On , 1: Off
5. System Maintenance
444
To Next Page
Loading...
Need help?
General
