5802
[Free Run]
Performs a free run on the copier engine.
• The machine starts free run in the same condition as the sequence of A4/LT, A3 or
A4 SEF printing from the 1st or 2nd tray. Therefore, the correct paper should be
loaded in the 1st tray or 2nd tray, but paper is not fed.
• The main switch has to be turned off and on after using the free run mode for a test.
001
B/W A4 LEF ENG
[0 to 1 / 0 / 1/step]002 FC A4 LEF ENG
003 FC A3 LEF ENG
5803 [INPUT Check] See “Input Check Table” in “Main SP Tables-9”.
5804 [OUTPUT Check] See “Output Check Table” in “Main SP Tables-9”.
5807
[Area Selection]
Sets the machine destination.
001 - *ENG
[0 to 7/ 2:NA / -]
1: Japan
2: NA
3: EU
4: Taiwan
5: Asia
6: China
7: Korea
* The default value depends on the original
machine destination.
5810
[SC Reset]
Resets a type A service call condition.
• Turn the main switch off and on after resetting the SC code.
5. System Maintenance
452
To Next Page
Loading...
