001 NV-RAM Data Upload CTL
Uploads the UP and SP mode data (except
for counters and the serial number) from the
NVRAM to an SD card.
[EXECUTE]
5825 [NV-RAM Data Download]
001 NV-RAM Data Download CTL
Downloads the UP and SP mode data from
an SD card to the NVRAM.
[EXECUTE]
5828 [Network Setting] *CTL
065
Job Spooling
Enables/disables Job Spooling.
[0 or 1 / 0 / 1/step]
0: Disabled, 1: Enabled
066
Job Spooling Clear: Start Time
Treatment of the job when a spooled job exists at power on.
[0 or 1 / 1 / 1/step]
0: ON (Data is cleared), 1: OFF (Automatically printed)
069
Job Spooling (Protocol)
Validates or invalidates the job spooling function for each protocol.
0: Validates, 1: Invalidates
bit0: LPR, bit1: FTP
bit2: IPP, bit3: SMB
bit4: BMLinkS, bit5: DIPRINT
bit6: sftp, bit7: (Reserved)
5. System Maintenance
468
To Next Page
Loading...
