127
Reso: Scanner(Color) [0 to 6 / 4 / 1/step]
Selects the resolution for color scanning mode. This is basically adjusted by the remote
system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
128
Reso: Scanner(Mono) [0 to 6 / 3 / 1/step]
Selects the resolution for BW scanning mode. This is basically adjusted by the remote
system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
5840 [IEEE 802.11]
006
Channel Max *CTL
[1 to 11 or 13 / 11 or 13 / 1 /step]
Europe/Asia: 1 to 13
NA/ Asia: 1 to 11
Sets the maximum number of channels available for data transmission via the wireless
LAN. The number of channels available varies according to location. The default settings
are set for the maximum end of the range for each area. Adjust the upper 4 bits to set the
maximum number of channels. DFU
• Do not change the setting.
007
Channel Min *CTL
[1 to 11 or 13 / 1 / 1 /step]
Europe: 1 to 13
NA/ Asia: 1 to 11
Sets the minimum number of channels available for data transmission via the wireless LAN.
The number of channels available varies according to location. The default settings are set
for the minimum end of the range for each area. Adjust the lower 4 bits to set the minimum
number of channels. DFU
• Do not change the setting.
Main SP Tables-5
475
To Next Page
Loading...
