045 WPA Debug Lvl *CTL
Selects the debug level for WPA
authentication application.
[1 to 3 / 3 / 1] 1: Info, 2: warning, 3: error]
This SP is displayed only when the
IEEE802.11 card is installed.
5841 [Supply Name Setting]
001 Toner Name Setting:Black *CTL
Specifies supply names. These appear on the
screen when the user presses the Inquiry
button in the user tools screen.
002 Toner Name Setting:Cyan *CTL
003 Toner Name Setting:Yellow *CTL
004 Toner Name Setting:Magenta *CTL
007 OrgStamp *CTL
011 Staple Std1 *CTL
012 Staple Std2 *CTL
013 Staple Std3 *CTL
014 Staple Std4 *CTL
021 Staple Bind 1 *CTL
022 Staple Bind 2 *CTL
023 Staple Bind 3 *CTL
5844 [USB]
001 Transfer Rate *CTL
0001: Full speed
0004: Auto Change
002 Vendor ID *CTL Displays the vendor ID. DFU
003 Product ID *CTL Displays the product ID. DFU
004 Device Release Number *CTL
Displays the development release version
number. DFU
Main SP Tables-5
477
To Next Page
Loading...
