025
SMTP Auth. Direct Setting [0 or 1 / - / – ]
Selects the authentication method for SMPT.
Bit switch:
• Bit 0: LOGIN
•
Bit 1: PLAIN
• Bit 2: CRAM MD5
• Bit 3: DIGEST MD5
• Bit 4 to 7: Not used
• This SP is activated only when SMTP authorization is enabled by UP mode.
026 S/MIME: MIME Header Setting
Selects the MIME header type of an E-mail
sent by S/MIME.
[0 to 2 / 0 / 1]
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
028 S/MIME: Authentication Check
[0 to 1 / 0 / 1]
0: Check
1: No check
5869 [RAM Disk Setting] *CTL
001 Mail Function
Set whether the RAM disk is used or not used
when using the mail functions.
[0 or 1 / 0 / 1]
0:OFF, 1:ON
5870 [Common keyInfo]
001 Writing *CTL
Writes to flash ROM the common proof for
validating the device for @Remote
specifications.
003 Initialize *CTL
Initializes the data area of the common proof
for validating.
Main SP Tables-5
485
To Next Page
Loading...
