002 SDK-2
003 SDK-3
004 SDK-4
005 SDK-5
006 SDK-6
5894
[External Counter Setting]
Test Name1_1
001 Switch Charge Mode *ENG [0 to 2 / 0 / 1/step]
5907 [Plug & Play Maker/Model Name] *CTL
001
Selects the brand name and the production name for Windows Plug & Play. This
information is stored in the NVRAM. If the NVRAM is defective, these names should be
registered again.
After selecting, press the "Original Type" key and "#" key at the same time. When the
setting is completed, the beeper sounds five times.
5913 [Switchover Permission Time]
002
Print Application Timer *CTL [3 to 30 / 3 / 1 second /step]
Sets the amount of time to elapse while the machine is in standby mode (and the operation
panel keys have not been used) before another application can gain control of the
display.
5967 [Copy Server Set Function] *CTL
[0 or 1 / 0 / – ]
0: Enable, 1: Disable
001
Enables and disables the document server. This is a security measure that prevents image
data from being left in the temporary area of the HDD. After changing this setting, you
must switch the main switch off and on to enable the new setting.
5974
[Cherry Server]
Specifies which version of ScanRouter, “Lite” or “Full”, is installed.
5. System Maintenance
488
To Next Page
Loading...
