• If both sides of 3 A4 sheets are copied and stored to the document server, the C: count is 6 and the
L: count is 6.
• If you enter document server mode then scan 6 pages, the L: count is 6.
8 221
ADF Org Feeds *CTL
[0 to 9999999/ - / 1]
These SPs count the number of pages fed through the ADF for front and back side
scanning.
8 221
-001
Front
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front side count is the same as
the number of pages fed for either simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Front side count is the same
as the number of pages fed for duplex front side scanning. (The front side is determined by
which side the user loads face up.)
8 221
-002
Back
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count is the same as the
number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back count is the same as the
number of pages fed for duplex rear-side scanning.
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
• If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also,
the pages are not counted if the jam occurs before the first sheet is output.
8 231
Scan PGS/Mode *CTL
[0 to 9999999/ - / 1]
These SPs count the number of pages scanned by each ADF mode to determine the work
load on the ADF.
8 231
-001
Large Volume
Selectable. Large copy jobs that cannot be loaded in
the ADF at one time.
8 231
-002
SADF Selectable. Feeding pages one by one through the ADF.
8 231
-003
Mixed Size
Selectable. Select "Mixed Sizes" on the operation
panel.
Main SP Tables-8
545
To Next Page
Loading...
