8 31x-003 400 dpi to 599 dpi
8 31x-004 200 dpi to 399 dpi
8 31x-005 199 dpi or less
• Copy resolution settings are fixed so they are not counted.
•
The Fax application does not allow finely-adjusted resolution settings so no count is done for the
Fax application.
8 381-001
T:Total PrtPGS
Field Number
*CTL
These SPs count the number of pages
printed by the customer. The counter for the
application used for storing the pages
increments.
[0 to 9999999/
- / 1]
The L: counter counts the number of pages
stored from within the document server
mode screen at the operation panel. Pages
stored with the Store File button from within
the Copy mode screen go to the C:
counter.
8 382-001
C:Total PrtPGS
Field Number
*CTL
8 383-001
F:Total PrtPGS
Field Number
*CTL
8 384-001
P:Total PrtPGS
Field Number
*CTL
8 385-001
S:Total PrtPGS
Field Number
*CTL
8 386-001
L:Total PrtPGS
Field Number
*CTL
8 387-001
O:Total PrtPGS
Field Number
*CTL
• When several documents are merged for a print job, the number of pages stored is counted for the
application that stored them.
• These counters are used primarily to calculate charges on use of the machine, so the following
pages are not counted as printed pages:
- Blank pages in a duplex printing job.
- Blank pages inserted as document covers, chapter title sheets, and slip sheets.
- Reports printed to confirm counts.
- All reports done in the service mode (service summaries, engine maintenance reports, etc.)
- Test prints for machine image adjustment.
5. System Maintenance
550
To Next Page
Loading...
