1001 Bit Switch
bit 3 No I/O Timeout 0: Disable 1: Enable
Enable: The machine I/O Timeout setting will have no affect. I/O Timeouts will
never occur.
bit 4 SD Card Save Mode 0: Disable 1: Enable
Enable: Print jobs will be saved to an SD card in the GW SD slot and not output to
paper.
bit 5 DFU - -
bit 6 DFU - -
bit 7 [RPCS,PCL]: Printable area frame border 0: Disable 1: Enable
Prints all RPCS and PCL jobs with a border around the printable area.
1001 Bit Switch
002 Bit Switch 2 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 DFU - -
bit 3 [PCL5e/c.PS]: PDL Auto Switching 0: Enable 1: Disable
Enables/disable the machine ability to change the PDL processor mid-job.
Some host systems submit jobs that contain both PS and PCL5e/c. If Auto PDL
switching is disabled, these jobs will not be printed properly.
bit 4 DFU - -
bit 5 DFU - -
bit 6 Switch dither 0: Use
normal
dither
1: Use
alternative
dither
See RTB#RD014018.
bit 7 DFU - -
Main SP Tables-9
587
To Next Page
Loading...
