1001 Bit Switch
010 Bit Switch 10 0 1
bit 0
to 3
DFU - -
bit 4 Not Used - -
bit 5 Auto Job Promotion locks the queue 0: Queue is
not locked
after AJP
1: Queue
locked after
AJP
If this is 1, then after a job is stored using Auto Job Promotion, new jobs cannot be
added to the queue until the stored job has been completely printed.
bit 6
Allow use of Auto Job Promotion if connected to an
external charge device.
0: Does not
allow AJP
with ECD
1: Allows AJP
with ECD
If this is 0, Auto Job Promotion will be automatically disabled if an external charge
device is connected.
Note: We do not officially support enabling this bit switch (1). Use it at your own
risk.
bit 7 Not Used - -
1003 [Clear Setting]
1003-001 Initialize System
Initializes settings in the System menu of the user
mode.
1003-003 Delete Program DFU
1004 [Print Summary]
1004-001 Service Summary
Prints the service summary sheet (a summary of all
the controller settings).
1005 [Display Version]
1005-002 Printer Version Displays the version of the controller firmware.
1101 [ToneCtlSet]
Main SP Tables-9
593