2. Remove the SD slot cover ( x 1).
3. Insert the SD card with the NVRAM data into SD Card Slot 2 (lower).
4.
Switch the copier main power switch on.
5. Do SP5825-001 (NVRAM Data Download) and press the "Execute" key.
• The serial number of the file on the SD card must match the serial number of the machine for
the NVRAM data to download successfully. The download fails if the serial numbers do not
match.
This procedure does not download the following data to the NVRAM:
• Total Count
•
C/O, P/O Count
NVRAM Data Upload/Download
615
To Next Page
Loading...
Need help?
General
