2. Rear cover [A] ( x 13)
3. Rear right cover [B] ( x 3)
4. Left cover [C] ( x 1)
5. Scanner rear cover [D] ( x 2).
6. Three harnesses [A] and a flat cable [B] ( x 4).
• The harnesses [A] and the flat cable [B] should be routed under the harness [C] when these
are reconnected.
• To release the lock of the flat cable connector, lift up the small white tab of the connector, and
to lock the flat cable, push down the small white tab.
1-Bin Tray Unit (D574)
63
To Next Page
Loading...
