No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
-42 D Ending with stop direction
-61
to -65
D Library abnormal recovery
-66 D Not available
-67 D Unfinished erase
-68 D HDD format failure (at normal)
-69 D HDD format failure (at abnormal)
-70 D Library incorrect recovery
-99 D Other error
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
875 CTL
Delete All error 1: HDD
A data error is detected for the HDD/NVRAM after the Delete All option has
been used.
Note:
The source of this error is the DataOverwriteSecurity Unit running from an SD
card.
• Defective HDD
1. Turn the main switch off/on and try the operation again.
2. Install the DataOverwriteSecurity Unit again.
-01 D Hddcheck - i error
-02 D Erase failure
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
876 CTL
Log Data Error
An error was detected in the handling of the log data at power on or during
machine operation. This can be caused by switching the machine off while it is
operating.
SC Tables
691
To Next Page
Loading...
Need help?
General
