No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
925 CTL
Net File function error
The NetFile file management on the HDD cannot be used, or a NetFile
management file is corrupted and operation cannot continue. The HDD is
defective and it cannot be debugged or partitioned, so the Scan Router functions
(delivery of received faxes, document capture, etc.), Web services, and other
network functions cannot be used.
HDD error status codes are displayed below the SC code:
• Refer to the four procedures below (Recovery from SC 925).
-00 B HDD is defective.
-01 B NetFile management file is broken.
Here is a list of HDD error status codes.
Display Meaning
(-1) HDD not connected
(-2) HDD not ready
(-3) No label
(-4) Partition type incorrect
(-5) Error returned during label read or check
(-6) Error returned during label read or check
(-7) "filesystem" repair failed
(-8) "filesystem" mount failed
(-9) Drive does not answer command
(-10) Internal kernel error
(-11) Size of drive is too small
(-12) Specified partition does not exist
(-13) Device file does not exist
Recovery from SC 925
6. Troubleshooting
696
To Next Page
Loading...
Need help?
General
