040 FusingMot:Special1:Low Speed *ENG
[-10.00 to 10.00 / 1.50 / 0.01%/
step]
041 FusingMot:Special2:Low Speed *ENG
[-10.00 to 10.00 / 1.50 / 0.01%/
step]
042 FusingMot:Special3:Low Speed *ENG
[-10.00 to 10.00 / 1.50 / 0.01%/
step]
043 FusingMot:Plain1/2:Grossy *ENG -
044 FusingMot:M-thick:Grossy *ENG -
051 BkOpcDevM:Normal Speed *ENG [-4.00 to 4.00 / 0.00 / 0.01/step]
052 BkOpcDevM:Low Speed *ENG [-4.00 to 4.00 / 0.00 / 0.01/step]
053 ColorOpcDevM:Normal Speed *ENG [-8 to 8 / 0 / 1/step]
054 ColorOpcDevM:Low Speed *ENG [-8 to 8 / 0 / 1/step]
055 Offset:Standard Speed:Color *ENG [-8 to 8 / 0 / 1/step]
056 Offset:Low Speed:Color *ENG [-8 to 8 / 0 / 1/step]
057 Execute *ENG [- / - / -]
130 OpcMotAdjCtrl *ENG [0 or 1 / 1 / 1/step]
1902
[Drum Phase Adj.]
001 Execute *ENG [- / - / -]
1907
[Paper Feed Timing Adj.]
Adjusts the timing of paper feed. (A "+" setting broadens paper feed interval, a “-”
setting narrows paper feed interval.)
001 Tray1 Clutch ON: Plain *ENG [-10 to 10 / 0 / 1mm/step]
002 Tray1 Clutch ON: Middle Thick *ENG [-10 to 10 / 0 / 1mm/step]
003 Tray1 Clutch ON: Thick *ENG [-10 to 10 / 0 / 1mm/step]
007 Tray1 Clutch OFF: Plain *ENG [-10 to 10 / 0 / 1mm/step]
008 Tray1 Clutch OFF: Middle Thick *ENG [-10 to 10 / 0 / 1mm/step]
Main SP Tables-1
61
To Next Page
Loading...
