009 Number of Failure *ENG [0 to 999999 / - / 1 times/step]
010 Error Result: C *ENG [0 to 9 / - / 1/step]
0: Not done
1: Completed successfully
2: Cannot detect patterns
3: Fewer lines on the pattern than the target
4: Out of the adjustment range
5 to 9: Not used
011 Error Result: M *ENG
012 Error Result: Y *ENG
013 Error Result: K *ENG
014 Temperature 2 *ENG [-10 to 100 / - / 1deg/step]
015 Temperature 3 *ENG [-10 to 100 / - / 1deg/step]
2197 [MUSIC Start Time]
001 MUSIC Start Time (EDT) *ENG [10 to 40 / 20 / 10ms/step]
002 TM Sensor Position *ENG [50.00 to 500.00 / 379.69 / 0.01mm/step]
2221
[Set LD Power]
These SP codes set the LD power level for each laser unit.
001 Standard Speed: Bk *ENG
[0 to 200 / 100 / 1%/step]
002 Standard Speed: C *ENG
003 Standard Speed: M *ENG
004 Standard Speed: Y *ENG
009 Low Speed: Bk *ENG
010 Low Speed: C *ENG
011 Low Speed: M *ENG
012 Low Speed: Y *ENG
2229
[Develop DC Vias]
Main SP Tables-2
93
To Next Page
Loading...
