2459 [Middle:EnvCorrectionTable]
013 Separation DC:Standard:1side *ENG [1 to 100 / 30 / 1/step]
014 Separation DC:Standard:2side *ENG [1 to 100 / 30 / 1/step]
015 Separation DC:Low:1side *ENG [1 to 100 / 30 / 1/step]
016 Separation DC:Low:2side *ENG [1 to 100 / 30 / 1/step]
017 Separation DC:Standard:1side *ENG [1 to 100 / 50 / 1/step]
018 Separation DC:Standard:2side *ENG [1 to 100 / 50 / 1/step]
019 Separation DC:Low:1side *ENG [1 to 100 / 50 / 1/step]
020 Separation DC:Low:2side *ENG [1 to 100 / 50 / 1/step]
2461
[Thin:Bias]
Adjusts the DC voltage of the discharge plate for thin paper.
001 Separation DC:standard:1side *ENG [0 to 4000 / 2000 / 10-V/step]
003 Separation DC:low:1side *ENG [0 to 4000 / 2000 / 10-V/step]
2463
[Thin:Bias:BW]
Adjusts the current for the paper transfer roller for thin paper in black-and-white mode.
001 PaperTransfer:Standard:1Sid *ENG [0 to 200 / 13 / 1-uA/step]
003 Paper Transfer:Low:1side *ENG [0 to 200 / 11 / 1-uA/step]
2467
[Thin:Bias:FC]
Adjusts the current for the paper transfer roller for thin paper in full color mode.
001 PaperTransfer:Standard:1Sid *ENG [0 to 200 / 17 / 1-uA/step]
003 Paper Transfer:Low:1side *ENG [0 to 200 / 16 / 1-uA/step]
2471
[Thin:SizeCorrection:BW]
Adjusts the size correction coefficient for the paper transfer roller current for each paper
size.
3. SP Mode Tables
116
To Next Page
Loading...
