Ricoh AFICIO MP C305SP - Page 855

2476
[Thin:SwitchTimingLeadEdge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 PaperTransfer:Standard:1side *ENG
[0 to 50 / 0 / 2mm/step]
003 Paper Transfer:Low:1side *ENG
005 Separation DC:Standard:1side *ENG
[0 to 50 / 30 / 2mm/step]
007 Separation DC:Low:1side *ENG
2477
[Thin:TrailEdgeCorrection]
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode.
001 PaperTransfer:Standard:1Side *ENG
[100 to 995 / 100 / 5%/step]
003 Paper Transfer:Low:1side *ENG
005 Separation DC:Standard:1side *ENG
007 Separation DC:Low:1side *ENG
2478
[Thin:SwitchTimingTrailEdge]
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode.
001 PaperTransfer:Standard:1side *ENG
[0 to 50 / 0 / 2mm/step]
003 Paper Transfer:Low:1side *ENG
005 Separation DC:Standard:1side *ENG
007 Separation DC:Low:1side *ENG
2479 [Thin:EnvCorrectionTable]
Main SP Tables-2
119