Ricoh AFICIO MP C305SP - Page 862

008 PaperTransfer:2Side:S2 *ENG [1 to 100 / 50 / 1/step]
011 PaperTransfer:1Side:S3 *ENG [1 to 100 / 27 / 1/step]
012 PaperTransfer:2Side:S3 *ENG [1 to 100 / 38 / 1/step]
015 PaperTransfer:1Side:S4 *ENG [1 to 100 / 17 / 1/step]
016 PaperTransfer:2Side:S4 *ENG [1 to 100 / 72 / 1/step]
2515
[Thick2:LeadingEdgeCorrection]
Adjusts the correction to the paper transfer roller current at the paper leading edge in
each mode.
003 Paper Transfer:1side *ENG
[100 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2516
[Thick2:SwitchTimingLeadEdge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
003 Paper Transfer:1side *ENG
[0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2517
[Thick2:TrailEdgeCorrection]
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode.
3. SP Mode Tables
126