013 PaperTransfer:standard:1Sid:S4 *ENG [1 to 100 / 24 / 1/step]
014 PaperTransfer:standard:2Sid:S4 *ENG [1 to 100 / 27 / 1/step]
015 PaperTransfer:Low:1Side:S4 *ENG [1 to 100 / 24 / 1/step]
016 PaperTransfer:Low:2Side:S4 *ENG [1 to 100 / 27 / 1/step]
2615
[Special3:LeadingEdgeCorrection]
Adjusts the correction to the paper transfer roller current at the paper leading edge in
each mode.
001 Paper Transfer:standard:1side *ENG
[100 to 995 / 100 / 5%/step]
002 Paper Transfer:standard:2side *ENG
003 Paper Transfer:Low:1side *ENG
004 Paper Transfer:Low:2side *ENG
005 Separation DC:standard:1side *ENG
006 Separation DC:standard:2side *ENG
007 Separation DC:Low:1side *ENG
008 Separation DC:Low:2side *ENG
2616
[Special3:SwitchTimingLeadEdge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
3. SP Mode Tables
150
To Next Page
Loading...
