3073 [TD.Sens Chk]
001 Disp Vt:K *ENG
[0 to 5.5 / - / 0.01V/step]
002 Disp Vt:C *ENG
003 Disp Vt:M *ENG
004 Disp Vt:Y *ENG
3074 [Force Tnr Supply:Exe]
001 RepeatCount *ENG
[- / - / -]
[Execute]
3075 [ID.Sens Chk]
001 Disp Vsg reg(front) *ENG
[0 to 5.5 / - / 0.01V/step]
002 Disp Vsg reg(center) *ENG
003 Disp Vsg reg(rear) *ENG
011 Disp Voffset(front) *ENG
012 Disp Voffset(center) *ENG
013 Disp Voffset(rear) *ENG
3100 [Tonner End Detection: Set]
001 ON/OFF *ENG
Sets if NE/TE is detected or not.
[0 or 1 / 0 / 1/step]
0:Detect, 1:NotDetect
002 NE Detection *ENG
Sets NE/TE detection mode.
[0 or 1 / 0 / 1/step]
0:ALL, 1:TESensor
3101 [Toner Status: Display]
3. SP Mode Tables
172
To Next Page
Loading...
Need help?
General
