Ricoh AFICIO MP C305SP - Page 918

3219 [TD.Sens:Vt':Disp]
001 Vt' 0Current:K *ENG [0.00 to / - / 0.01V/step]
002 Vt' 0Current:C *ENG [0.00 to / - / 0.01V/step]
003 Vt' 0Current:M *ENG [0.00 to / - / 0.01V/step]
004 Vt' 0Current:Y *ENG [0.00 to / - / 0.01V/step]
021 Vt' 2Current:K *ENG [0.00 to / - / 0.01V/step]
022 Vt' 2Current:C *ENG [0.00 to / - / 0.01V/step]
023 Vt' 2Current:M *ENG [0.00 to / - / 0.01V/step]
024 Vt' 2Current:Y *ENG [0.00 to / - / 0.01V/step]
3220 [Vtcnt :Disp/Set]
001 Current: K *ENG
Displays/Sets corrent TD sensor control
voltage.
[2.00 to 5.00 / 4.00 / 0.01V/step]
002 Current: C *ENG
003 Current: M *ENG
004 Current: Y *ENG
011 Initial: K *ENG
Displays/Sets the TD sensor control voltage at
TD sensor initial settings execution.
[2.00 to 5.00 / 4.00 / 0.01V/step]
012 Initial: C *ENG
013 Initial: M *ENG
014 Initial: Y *ENG
3230 [Vtref :Disp/Set]
001 Current: K *ENG
Displays/Sets the target value of corrent TD
sensor output voltage.
[0.00 to 5.00 / 2.70 / 0.01V/step]
002 Current: C *ENG
003 Current: M *ENG
004 Current: Y *ENG
3. SP Mode Tables
182