• We recommend that you use a 4000 ANSI lumen or brighter overhead projector to project OHP
transparencies.
• When copying or printing onto OHP transparencies or thick paper, the copy/print speed is slower
than usual.
• Flatten out curled sheets before loading them.
• If multiple sheet feeding occurs, load sheets one by one.
• When copying or printing onto letterhead paper, the paper placing orientation is different
depending on which function you are using. See “Loading Orientation-Fixed Paper or Two-Sided
Paper”.
• If you load paper of the same size in two or more trays, the machine automatically shifts to the
other tray when the first tray in use runs out of paper. This function is called Auto Tray Switching.
(However, if the paper type of one tray is recycled or special paper, the settings of the other trays
must be the same for the Auto Tray Switching function to work.) This saves interrupting a copy run to
replenish paper when making a large number of copies. You can set the paper type of trays 1 4
under Paper Type: Tray 1 4. See “System Settings”, Network and System Settings Reference. For
the setting procedure of the Auto Tray Switching function, see “Copier and Document Server
Features”, Copy and Document Server Reference.
• page 123 "Loading Orientation-Fixed Paper or Two-Sided Paper"
• page 141 "Envelopes"
• page 143 "Thick Paper"
5. Adding Paper
140
To Next Page
Loading...
