4. Internal tray 1 (types 1 and 2 only)/ Finisher shift tray (type 3 only)
(The illustration shows the finisher shift tray.)
Copied/printed paper and fax messages are delivered here.
Pull out the extender when printing on A4 or 8
1
/
2
× 11 size paper or larger.
5. Front cover
Open to access the inside of the machine. To open this cover, push the front cover release button.
6. Tray 1
Load paper here print side down.
7. Paper feed unit (optional)
Load paper here print side down.
8. Paper feed unit with the casters (optional)
Load paper here print side down.
9. Exposure glass
Place originals face down here.
10. Front cover release button
Push this button to open the front cover.
11. Internal tray 2 (type 2 only)/ finisher (type 3 only)
(The illustration shows the finisher.)
If you select internal tray 2 as the output tray, copied/printed paper and fax messages are delivered here.
Pull out the extender on internal tray 2 when printing on A4 or 8
1
/
2
× 11 size paper or larger.
The finisher sorts, stacks, and staples multiple sheets of paper.
12. Ventilation holes
Prevent the machine from overheating.
13. Bypass tray
Use to print onto plain paper, thick paper, OHP transparencies, label paper (adhesive labels), and custom
size paper. Pull out the extender when loading A4 or 8
1
/
2
× 11 size paper or larger in the bypass tray.
14. Main power switch
If the machine does not operate after turning on the operation switch, check if the main power switch is turned
on. If it is off, turn it on. See “Turning On/Off the Power”.
2. Guide to the Machine
50
To Next Page
Loading...
