817
Monitor Error
B
This is a file detection and electronic
file signature check error when the
boot loader attempts to read the self-
diagnostic module, system kernel, or
root system files from the OS Flash
ROM, or the items on the SD card in
the controller slot are false or
corrupted.
• OS Flash ROM data defective;
change the controller firmware
•
SD card data defective; use another
SD card
819
Kernel stop
Due to a control error, a RAM overflow occurred during system processing. One of the
following messages was displayed on the operation panel.
[5032] B HAIC-P2 error
• System program defective
•
Controller board defective
• Optional board defective
1. Replace controller firmware
[6261] B init died
[0696e] B Process error
[0766d] B VM full error
[554C] B USB error
[----] B The others
820 Self-Diagnostic Error: CPU
B
• [0001-0015] [000A-000D]: Detailed error code
During the boot monitor program
and self-diagnostic, any exception
or cut-in are not supposed to
happen. If these happen, it is defined
as SC.
• Defective CPU device
•
Defective boot monitor program or
self-diagnostic program
1. Replace the controller board.
2. Reinstall the system firmware.
SC Tables
173
To Next Page
Loading...
