Ricoh D127 - Page 279

5804
Output Check
"Output Check" in this chapter.
5810 SC Reset
001 Fusing SC Reset Resets SC of CE-Reset.
5811* Machine Serial
002
Display
"Machine No. Setting" in this section.
5812 Service Tel. No. Setting
001
Service CTL -
Sets the telephone number for a service representative. This number is printed on the
Counter List, which can be printed with the user's "Counter" menu.
This can be up to 20 characters (both numbers and alphabetic characters can be input).
002
Facsimile CTL -
Sets the fax or telephone number for a service representative. This number is printed on
the Counter List.
This can be up to 20 characters (both numbers and alphabetic characters can be input).
003
Supply CTL -
Use this to input the telephone number of your supplier for consumables. Enter the
number and press"StringIn" key.
Press the "Clear modes" key to delete the telephone number.
004
Operation CTL -
Use this to input the telephone number of your sales agency. Enter the number and press
#.
Press the "Clear modes" key to delete the telephone number.
5816 Remote Service CTL -
021 RCG-C Registed [0: Unregistered 1: Registered]
System Service Mode
71