Ricoh D127 - Page 280

062
Use Proxy
This SP setting determines if the proxy server is used when the machine communicates
with the service center.
063
Proxy Host
This SP sets the address of the proxy server used for communication between embedded
RCG-N and the gateway. Use this SP to set up or display the customer proxy server
address. The address is necessary to set up embedded RCG-N.
• The address display is limited to 127 characters. Characters beyond the 127th
character are ignored.
•
This address is customer information and is not printed in the SMC report.
064
Proxy Port Number
This SP sets the port number of the proxy server used for communication between
embedded RCG N and the gateway. This setting is necessary to set up embedded RCG-
N.
• This port number is customer information and is not printed in the SMC report.
065
Proxy User Name
This SP sets the HTTP proxy authentication user name.
• The length of the name is limited to 31 characters. Any character beyond the 31st
character is ignored.
•
This name is customer information and is not printed in the SMC report.
066
Proxy Password
This SP sets the HTTP proxy authentication password.
• The length of the password is limited to 31 characters. Any character beyond the
31st character is ignored.
• This name is customer information and is not printed in the SMC report.
3. Appendix: SP Mode Tables
72