Ricoh D127 - Page 281

250
CommLog Print
Prints the communication log.
5824 NVRAM Upload
5824 1
"NVRAM Upload/Download" in this section.
5825 NVRAM Download
5825 1 "NVRAM Upload/Download" in this section.
5828 Network Setting CTL
001
IPv4 Address (Ethernet /
IEEE802.11)
Default: 0B16212C H (011.022.033.044)
002
Subnet Mask (Ethernet /
IEEE802.11)
Default: 00000000 H (000.000.000.000)
003
IPv4 Default Gateway
(Ethernet / IEEE802.11)
Default: 00000000 H (000.000.000.000)
006
DHCP (Ethernet /
IEEE802.11)
Determines whether DHCP IP Address Setting is used or
not.
[0: Not used 1: Used]
021 Active IPv4 Address Default: 00000000 H (000.000.000.000)
022 Active IPv4 Subnet Mask Default: 00000000 H (000.000.000.000)
023 Active IPv4 Gateway Address Default: 00000000 H (000.000.000.000)
050 1284 Compatibility (Centro) [0:Not permitted 1:Permitted]
052 ECP (Centro) [0:Not permitted 1:Permitted]
065 Job Spooling
Enables/disables Job Spooling.
[0 or 1 / 0 / 1 /step]
0: Disable, 1: Enable
066 Job Spooling clear: start time
Determines whether spooled job in the HDD is cleared
or printed on machine start-up.
[0: Clear 1: Print]
System Service Mode
73