001
Setting 1 CTL
This is a debugging tool. It sets the
debugging output mode of each
Net File process.
Default: Bit SW 1000 0000
Bit Groups
0 System & other groups (LSB)
1 Capture related
2 Certification related
3 Address book related
4 Machine management related
5 Output related (printing, delivery)
6 Repository related
7 Debug log output
002
Setting 2 CTL
Default: Bit SW 0000 0000
Bit Groups
0-6 Not used
7
Log time stamp setting
0: Date/Hour/Minute/Second
1: Minute/Second/Msecond
5844 USB
001
Transfer Rate CTL
Sets the speed for USB data transmission.
[Full Speed]
[Auto Change]
002
Vendor ID CTL
Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company
[0x0000 to 0xFFFF/1] DFU
3. Appendix: SP Mode Tables
84
To Next Page
Loading...
