003
Product ID CTL
Sets the product ID.
[0x0000 to 0xFFFF/1] DFU
004
Device Release Number CTL
Sets the device release number of the BCD (binary coded decimal) display.
[0000 to 9999/1] DFU
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
005
Fixed USB Port [0 to 3/ 0 / 1 /step ]
Sets the control function saving driver re-install ON/OFF.
0: OFF
1: ON (Level 1)= ON for the same model.
2: ON (Level 2)= Depending on “SP5844 -006,-007”
006
PnP Model Name [20 letter(s)]
Sets the model name for USB PnP when “SP5844-005” is “2”.
007
PnP Serial Number [12 digit]
Sets the serial number for USB PnP when “SP5844-005” is “2”.
100
Notify UnSupport [0: Disabled / 1: Enabled]
Sets banner message popup Enabled/Disabled on unsupported USB device connection.
5845
Delivery Server Setting CTL -
Provides items for delivery server settings.
001
FTP Port No. [ 0 to 65535 / 3670 / 1 /step]
Sets the FTP port number used when image files to the Scan Router Server.
006
Delivery Error Display Time [0 to 999 / 300 / 1 second /step]
Use this setting to determine the length of time the prompt message is displayed when a
test error occurs during document transfer with the NetFile application and an external
device.
System Service Mode
85
To Next Page
Loading...
